When installing your blinds, take measurements in three locations. Measure the width of the window at its top, middle, and bottom and round each number to the nearest 1/8 inch. When measuring the width, measure from the top of the window frame to the bottom sill. Add three inches to each measurement to ensure sufficient sunlight blocking and privacy at the blinds’ edges. This way, you’ll know exactly how wide to cut the blinds. You can measure the width of the window using a measuring tape. Alternatively, you can choose to have blinds installed by professionals at https://blindrepairseattle.com/.
Another important thing to consider is the time. If you have a busy schedule, you don’t want to spend the day attempting to install your blinds. Choose a time during the afternoon, evening, or morning that will allow you to finish the job. Otherwise, you’ll likely be calling a professional installer many times throughout the day.
Before attempting the blinds installation process, determine which type of mounting system will best fit your window frame. Inside mount blinds look neater and are easier to remove than outside-mounted blinds. However, be aware that the holes created by the mounting brackets may not be covered when the blinds are removed later. Also, be sure to check whether the window frame has enough depth to accommodate brackets. Otherwise, holes from other window hardware may have weakened the frame.
If the brackets are center-mounted, drill pilot holes. Next, install the brackets with the screws provided with the blinds. After the brackets are installed, install the headrail. Most headrails lock into their mounting brackets. You may want to consider a decorative valance to camouflage the headrail. As you install your blinds, remember that they will collect dust over time. Therefore, it is a good idea to clean them regularly.
When choosing blinds, make sure they match your design aesthetic. Choose blinds that are neutral in color or that blend well with the surrounding area. They should match the size of the window and the color of the walls. You can choose from many types and colors. Choosing blinds that complement the design of your home can be a fun and rewarding experience. And don’t forget to consider your budget. A little research can go a long way!
Whether you choose to install inside mount or outside mount window blinds, the mounting brackets should be level and free of any obstructions inside the window frame. Before installing your blinds, make sure you have level headrails and follow the manufacturer’s instructions. If you have decorative valances, you can install them further back. Before you start, mark the location where you’d like the brackets to be by marking with a pencil.
In addition to the width of the blinds, make sure to measure the height and width of the window space. You don’t want to buy blinds that are too short or too wide, because they’ll give the room too much light. And remember that blinds come in standard sizes, but you may need to order custom-made blinds. It’s important to take measurements for every window in the house so that you don’t end up with blinds that are too tall, or too short.
The cost of installing blinds varies greatly depending on the size of the house. A two-bedroom house with five to six windows will probably cost $675 to $725. For a larger house, the cost may be as high as $1,450 or even more. This will depend on the number of windows, but many blind installation contractors work by the hour and will charge you according to the size of your windows. For example, a contractor may offer special pricing if you live in a certain neighborhood so that you get a discount for the same number of windows.
The cost of blinds installation can range from $50 to $115 per window. The price will depend on the type of blinds you buy and whether you have the tools at home. A ladder, a measuring tape, and a level will be required. If you do not have these tools, you could end up spending another $150 on the job. But if you do not have the tools, there are some DIY options available.
If you’re thinking of installing blinds yourself, it can be a relatively simple task. Many home improvement stores offer DIY installation services. However, it is best to call in a professional. This way, you can be sure the blinds you buy will fit the window frames and your budget. If you’re unsure whether or not to hire a professional, you can ask for an estimate first. A professional installer will be able to tell you exactly how much the project will cost. Ultimately, you’ll save money and improve the quality of your interior.